stoga Mk22 Benutzerhandbuch Seite 4

When this operation is performed, the white light of caps LK key flashes, and the keyboard
FN+
=
has no output function
=
Enter the game mode light, W, a, s, D key lights on, you can customize
FN+
FN+
Switch to the next color: red, orange, yellow, green, cyan, blue, purple, white, color cycle
=
(some backlight modes are valid)
PF1 mode, in this mode, the white light of key x is always on. When this operation is
=
FN+
performed in the drive interface, switch to profil1
PF2 mode, in this mode, the white light of key C is always on. When this operation is
FN+
=
executed in the drive interface, switch to profil2
PF3 mode, in this mode, the white light of V key is always on. When this operation is
=
FN+
executed in the drive interface, switch to profil3
FN+
Lock / open windows, app, open by default
=
The backlight speed is accelerated (adjustable for 5 times, and the white light of caps LK +
FN+
=
win key flashes 3 times at the limit). The default speed is about 80%)
The backlight speed is slowed down (adjustable for 5 times, and the white light of caps LK
Alt
FN+
=
+ win key flashes 3 times at the limit). The default speed is about 80%)
When the keyboard is in upper case, the LED light of capslk button is always on, and when thekeyboard is in
lower case, it is synchronized with the backlight
The specific operation steps of backlight recording are as follows:
1.irst press FN + to enter the game backlight: A, s, D, w lights
2.Press FN + , the capslock and win indicator lights are always on to enter the recording mode
3.When recording and lighting LED, you need to press FN +
description: FN + first = red; second = orange; third = yellow; fourth = green; fifth = cyan; Sixth = blue; seventh
= purple; eighth = white; Ninth =colorless (to cancel multiple backlight). And in the
prompt} .
4.Record led 3 and repeat
5.After recording, press FN +
6.From backlight mode to game mode, press FN +
to backlight mode+
Mk22 mechanical keyboard
again to save the recorded light (the previous default backlight is replaced)
key to switch to backlight mode,and press FN to switch
03
, and then click the led you want to turn on. {color
corresponding color