Chauvet DJ Intimidator Wash Zoom 350 IRC Schnellreferenzanleitung Seite 4

Intimidator™ Wash Zoom 350 IRC QRG
AC Power
Power Linking
Fuse
Replacement
Infrared Remote
Control 6
(IRC-6)
All manuals and user guides at all-guides.com
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
For the maximum number of Intimidator™ Wash Zoom 350 IRC products
that you can power link at each voltage, see the User Manual or the sticker on
the product.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
The Intimidator™ Wash Zoom 350 IRC is compatible with the Infrared
Remote Control 6 (IRC-6) from CHAUVET®.
The following IRC-6 buttons are used with the Intimidator™ Wash 350 IRC:
· <BLACKOUT> - turns LED on/off
· <AUTO> - selects auto program mode
· <SOUND> - selects Sound-Active mode
· <STROBE> - strobing (0–20 Hz)
· <SPEED> - auto program speed
· <SENSITIVITY> - selects sound sensitivity
· <%> - dimmer
· <MANUAL> - white LED manual control
· <FADE/SNAP> - color change
· <R> - red LED manual control
· <G> - green LED manual control
· <B> - blue LED manual control
· <+> - shutter/dimmer/sensitivity/pan speed/tilt speed and macro increase
· <-> - shutter/dimmer/sensitivity/pan speed/tilt speed and macro decrease
· <0> to <9> - pan/tilt macro movements
4
EN