WARRKY CH13 Bedienungsanleitung

(CH13)
USB-C to HDMI Adapter
(4K@30Hz)
HDMI
USB-C
Signal output device WARRKY USB-C to Signal input device
(*DP Alt Mode) HDMI Cable (HDMI 1.4/up port)
Please feel free to contact us if you need any help.
You will get a friendly and efficient response within 18 hours.
Notice
1. Only works for DP Alt Mode supported devices, meaning Thunder-
bolt 3 and USB-C 3.1 Gen 2 or up devices. E.g. Thunderbolt 4, USB-C
3.2.
2. UNI-DIRECTIONAL from USB C source device to HDMI target
screen.
3. For USB-C 3.1 Gen 1 devices, please kindly check if they support DP
Alt Mode. Contact us if you are not so sure.
4. Not for charging.
FAQs
1. No signal on display
a. Make sure the USB-C port of your device supports video signal
output (DP Alt Mode).
b. Make sure your laptop is connected to AC power.
c. For some displays that do not automatically detect and switch
input sources, please adjust manually to select the correct HDMI input
source.
d. For displays with multiple HDMI ports, try with another one.
e. Make sure all connections are tight, and then reboot your devices
to see if there is any difference.
f. Try to update firmwares from manufacturer official websites. E.g.
motherboard BIOS, UEFI of the laptop.
2. Screen is flickering
a. Lower the resolution and refresh rate.
b. Dust accumulation may lead to poor connection. Please wipe
the ports with an insulated cotton pad before connecting.
3. No audio
a.
System Preferences →> Sound →> Output. Change the audio
output from your laptop to TV or other devices.
b. Update Realtek Audio Driver for Windows 10 (64-bit) or later Audio
Driver from the manufacturer Official Website.
! 4. Stop working after a while
a. Re-plug and make sure all connections are tight, then reboot your
devices.
b. Dust accumulation may lead to poor connection. Please wipe the
ports with an insulated cotton pad before connecting.
c. We offer a life-time unconditional warranty. Please contact
support@warrky.com. You would get a refund /replacement offer
without hassle.
5. Does not support 4K@30Hz
The supported resolutions and refresh rates depend on the specifica-
tions of the host devices, cables, and connected displays.
For example: Both the cable and the monitor support 4K@30Hz,
while the graphics card can only output 1080p@60Hz. As a result, the
final outcome would only be 1080p@60Hz.
Incompatible Devices
(Not a Full List)
Samsung
Galaxy A5/A6/A10/A10e/A11/A20/A50/A70/A71/A80/
S6/S7/J6/J7/M20/M30, Tab A/ Tab 3/Tab S3/Tab S6 Lite/Tab S7 Lite
Huawei
P9/P10/P10 Lite/P20 Lite/P30 Lite, Mate9/Mate 20 Lite, Mediapad
T5/M5/M5 Lite, M5 Pad, NOVA, Honor 9/20
Others
Amazon Fire Tablets, GoPro, Cameras, iPhone, LG Stylo 4/5/6,
Motorola G6 Plus/G7, Nintendo Switch, OnePlus 2/3/3T/5/5T/6/6T/7,
Pixel phones, etc.
Note
Surface Dock 2：Works for the rear facing ports only, NOT the front
ports.