Herunterladen Diese Seite drucken

Renkforce RF-WC-200 Bedienungsanleitung Seite 2

2k webkamera mit hd-auflösung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating Instructions
RF-WC-200 2K HD Resolution Web Camera
Item no: 2380280
1 Intended use
The product is a webcam that connects to a USB port on a PC. Use the product in video calls and to re-
cord images and videos.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
Product
Operating instructions
3 Latest product information
Download the latest product information at
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
The product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
5.2 Handling
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Consult an expert when in doubt about the operation, safety or connection of the appliance.
5.3 Operating environment
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
Do not switch the product on after it has been taken from a cold to a warm environment. The con-
densation that forms might destroy the product. Allow the product to reach room temperature before
you use it.
5.4 Connected devices
Also observe the safety and operating instructions of any other devices which are connected to the
product.
6 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
7 Product overview
1
2
3
4
5
6
2
www.conrad.com/downloads
or scan the QR code shown. Fol-
1
Light control button
2
Light
3
Camera
4
Microphone
5
Clamp
6
Tripod socket
8 Getting started
To get started, mount the product on top of a PC display or on a tripod and connect the product to a PC.
P
:
RECONDITIONS
a
The PC has booted.
1. Mount the product on top of a PC display or on a tripod.
2. Connect the USB-A plug to a USB port (min. USB2.0) on the PC.
à
The required drivers install automatically.
à
The product is ready for use.
9 Operation
Note:
When another webcam is connected to the same PC, it is necessary to switch webcams.
9.1 Making video calls
After connecting the product to the PC, use the camera and microphone in video calls.
1. Start a video call application.
à
The application recognizes the product as a camera.
2. Speak into the microphone for sound transmission.
9.2 Recording video and images
Use the product to record video and images and save them to the PC.
1. Open a video recording application on the PC.
à
The application recognizes the product as a camera.
2. Record video and images and save them to the PC.
9.3 Adjusting the light
Turn on and off the light. Adjust the light settings for better image quality.
1. Touch the light control button multiple times to select a light colour or to turn the light off.
2. When the light is on, keep touching the light button to adjust the light intensity.
10 Cleaning and care
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
11 Technical data
Power supply ........................................ 5 V/DC, min. 500 mA via USB
USB interface ....................................... min. USB 2.0
System requirements ............................ Windows® 7 and above
Cable length ......................................... 150 cm
Operating temperature ......................... -20 to +65 °C
Operating humidity ............................... 20 – 90 % RH
Storage temperature ............................. -20 to +65 °C
Storage humidity ................................... 20 - 90 % RH
Dimensions (W x H x D) (approx.) ........ 95 x 56 x 55 mm
Weight (approx.) ................................... 106 g
11.1 Camera
Video resolution .................................... max. 2592 x 1944 px
Video format ......................................... AVI
Focal distance ....................................... 50 cm to infinity
11.2 Light
Luminous flux ....................................... 20 lm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2380280_V1_0821_jh_mh_en
MacOS Mojave 10.14 and above
Ubuntu 14.04

Werbung

loading

Diese Anleitung auch für:

2380280