Troubleshooting; Specifications - ELRO DUO LED FLOODLIGHT 20 WATT Bedienungsanleitung

6.
Trouble shooting
Floodlight does not turn on.
- Check Lux setting
- Check wall switch is on
- Confirm wiring is correct
Floodlight remains on
- Check time setting.
- Cover PIR detector with black insulating tape. If after the timer set time expires the floodlight turns off this indicates that the PIR
detector can see a moving heat source. Eg: Open window, boiler outlet, open exterior door or moving branches or bushes retaining
heat from the daytime period.
Floodlight flashes on and off
- PIR detector photocell being triggered off by reflected light.
7.

Specifications

Power requirement
Power cord
Lighting load
Lumen (lm)
Color temperature (K)
Lux adjustment
Time adjustment
Protection Degree
Environmental concerns:
Please DO NOT dispose of electrical appliances as unsorted waste, use the recycling facilities provided by your local
authorities. Please DO NOT dispose of packaging as unsorted waste, use the recycling facilities provided by your local
authorities. There are no user serviceable parts inside. When the lifespan of the light source comes to an end, the whole
luminaire will need to be replaced.
Warning:
The external flexible cable cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
The light source of this luminaire is not replaceable; when the light source reaches its end of the life the whole luminaire shall be replaced.
Warranty:
The manufacturer guarantee this lighting fixture to be free from defects in materials and workmanship for a period
of 2 years warranty from date of purchase.
Concluding remarks:
Thank you very much for your trust and choice to purchase our product.
If you have any issues about this product, please feel free to contact us:
ELRO Europe |
Postbus 9607 - Box E800
1006 GC Amsterdam - The Netherlands
: 220V – 240V, 50Hz
: H05RN-F, 3G, 0,75 mm² x 90 cm
: 20W
: >1200lm
: 6500K
: 0 – 1000 Lux
: 5sec. – 12 min.
: IP 54
www.elro.eu
www.elro.eu
- 4 -