Wiha zai Hause DHT0010 Bedienungsanleitung Seite 33

Operating instructions
unit, see chapter „6.5 Switching modes" on page 28.
4. Press the ON/OFF button to start inflation. The current pressure
is shown in real-time while inflating.
5. When the preset pressure value has been reached, the inflation
stops automatically. To stop the inflation manually press the
ON/OFF button.
6. Disconnect the air pump from the inflated product.
CAUTION: The air hose may get very hot after inflating and
some air may leak out of the valve when disconnecting the air
pump. To prevent injuries and avoid pressure loss, quickly discon-
nect the air pump from the inflated product.
09/11/21
1. Put the air valve adapter into the air valve of
the product to be inflated. Be sure there is no
leaking.
2. Press the ON/OFF button for approx. 2 s to
turn the air pump on.
3. Select the desired mode and the air pressure
EN
33