Setting Up The Fire Bowl; Operation - tepro GLENVIEW Bedienungsanleitung

Step 4
Place the fire bowl (E) in the frame (A).
Place the wood grate (D) in the fire bowl (E).
Screw the grip ring (G) to the spark screen (F) with a nut (K).
Place the spark screen on the fire bowl.
Important: All screws must be tightened securely.

Setting up the fire bowl

Attention Risk of damage!
During use, the screw connec-
tions can gradually loosen and
affect the stability of the fire-
place. Check the tightness of
the screws before each use. If
necessary, retighten all screws
to ensure a firm stand.
• Before using the fireplace, set it up on
a level, firm surface outdoors.
• Have the poker ready to stoke the fire
or to distribute the charcoal.
P21132_TEPRO_1170_Feuerschale_Glenview_DE_GB_211007.indd 19

Operation

Danger Risk of burning!
The fire bowl, contained char-
coal and wood get very hot dur-
ing use so that contact with
them can cause serious burns.
– Always wear oven or BBQ gloves when
baking. (Glove Category II with regard
to heat protection, e.g. DIN-EN 407.
Glove must match the PSA regulation.)
– Keep a sufficient distance to hot parts,
as any contact can lead to extremely
severe burns.
– Do not wear clothes with wide sleeves.
t
19
7/10/2021 2:52 PM