Safety Information; Before Using; Restrictor Cap Settings - Levoit LV110WP-RF Bedienungsanleitung

I TA L I A N O
IT
I N D I C E
Contenuto della confezione
Informazioni di sicurezza
Prima dell'uso
• Impostazioni dei restrittori di flusso
Informazioni sul filtro
Risoluzione dei problemi
Informazioni sulla garanzia
C O N T E N U T O
D E L L A C O N F E Z I O N E
3 cartucce filtranti
6
6
19
19
19
20
21
21
English
Pitcher Replacement Filter
Model: LV110WP-RF
S A F E T Y I N F O R M AT I O N
Follow all safety guidelines. Read all instructions before using.
• Only filter tap water. This filter cartridge is not designed to filter
water from other sources (such as river water).
• The filter cartridge may become clogged and may not work
correctly if filtering liquids other than tap water.
• Do not filter hot water (over 35°C / 95°F). This may damage the
filter and may release contaminants.
B E F O R E U S I N G
1. Remove all packaging from the filter
cartridge.
2. Remove the restrictor caps from the
bottom of the filter. [Figure 1.1]
3. Soak the filter cartridge in clean tap
water (submerged completely) for 15
minutes.
NOTE: There may be carbon dust in the water
while rinsing or soaking the filter. This is normal.
4. Rinse the filter cartridge thoroughly for
10 seconds under running water.
5. Replace the restrictor caps on the
bottom of the filter.

Restrictor Cap Settings

• Place the restrictor cap in the "+"
position if you want water to filter
faster, or in the "-" position if you want
water to filter more thoroughly.
[Figure 1.2]
• You can remove the caps completely
if you want water to filter as fast as
possible.
EN
Figure 1.1
+ position
– position
Figure 1.2
7