Cleaning And Maintenance; Technical Information - Gerlach Germany GL 4411 Bedienungsanweisung

1.Connect the coffee machine to mains power.
2.Fill the water tank (2) with water until it reaches the maximum level.
3.Put the Carafe (9) onto the warming plate(4).
4.Activate the brewing process by using On/Of f button (13)
5.Wait for all of the water to transfer
6.Turn the coffee machine off using the On / Off button (13) and disconnect from the mains power.
BREWING COFFEE / TEA:
1.Make sure that the coffee machine is connected to mains power.
2.Open the water tank lid (1) and pour sufficient water into the water tank (2). Take care not to exceed the maximum level.
3.Fill the filter (20) with coffee/tea. You can use replaceable paper inserts. Place the filled filter in the funnel (6).
4. Optionally you can use the Strength option button (14) to make the cof fee stronger. The Strength indicator (18) will turn on.
5.Activate the brewing process by using the On/Of f button (13). The On / Off Indicator will turn on.
6.Wait until all of the water is transferred from the water tank (2) to the pot (9).
7.The coffee machine will operate in the pot-warming mode for the next 40 minutes. After that time the On / Off indicator will turn off.
8.When you have finished using the coffee machine turn it off using the on/off button (5) and disconnect from the mains power.
!! WARNING!! Make sure to throw out the used coffee ground from the Filter and clean the filter and Funnel after every use and before
storage. The coffee ground / tea will start to mold and will
Clock setting:
1. Turn on the device with the On / Off button (13)
2. The display (19) will light up and show 12:00.
3. Using the Minute (11) and Hour (15) buttons you can change the displayed time.
Programming auto On function:
You can set the device to begin brewing at an desired time. To do so follow the steps below:
1. Turn on the device using the On / Off button (13).
2. Set up the current time following the above Clock setting instructions
3. Press the Program button (12).
4. The program Indicator (16) will start to blink.
5. The display will show 12:00.
6. Use the Hour (15) and Minutes (11) buttons to change the start time.
7. Confirm with the Program button (12).
8. The Program indicator (16) will now stay lit.
9. To turn off press the Program button (12) again. The Program Indicator (16) will disappear.

CLEANING AND MAINTENANCE

Cleaning:
1.Disconnect the coffee machine from the mains power.
2.Never immerse the coffee machine in water.
3.You can wipe it with a soft, damp cloth.
4.Rinse the filter under running water. Wash the pot with a soft, damp cloth and dishwashing detergent.
5.Elements of the coffee machine should not be washed in a dishwasher.
Descaling:
To ensure that the coffee machine operates reliably and be fully ef fective it needs to be descaled regularly. The frequency of descaling
depends on water hardness and frequency of use. The depositing lime scale leads to longer cof fee preparation and may lead to
damage to the coffee machine.
PLEASE DESCALE THE DEVICE ONE EVERY 5-8 weeks. Devices damaged by bad maintenance will not be eligible for warranty
claims and repair.
We recommend using descaling liquids especially suited to cof fee machines and kettles with plastic housing. Follow the given
instructions. After rinsing the lime scale deposits from the water elements of the cof fee machine, perform 3 brews using only water prior
to the first coffee brewing.

TECHNICAL INFORMATION

Supply voltage: 220-240V ~50/60Hz
Power Nom: 900W
Capacity: 1,5 L
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
4