Placing Your Child In The Car Seat - lief! Malou Gebrauchsanweisung

All manuals and user guides at all-guides.com

Placing your child in the car seat

Loosen the shoulder belts by pressing the quick adjuster button,
(A1) and pulling the shoulder belts towards you (A2). Release the
belt buckle and drape the belts with the tongue sections over the
two side of the seat. (B) and pull the buckle forward, attach the loop
of the belt pad over the edge of the quick adjuster button. Make
sure there are no toys or other hard objects in the shell. Position
your baby comfortably in the baby car seat. Join the buckle tongue
sections together and insert them into the buckle (until it clicks) (C).
Pull the shoulder belts tight using the quick adjuster belt strap on the
front. The loop can be secured under the shell rim (D).
Adjusting the height of the shoulder belts
The shoulder belts should run through the slots located directly
above the baby s shoulders.
• Pull the shoulder belts through the slots in the shell and cover.
• Place the shoulder belts back, at the required height and use the
same slots in both the shell and the cover.
• Check to make sure the belts can be used properly and that they
are not twisted.
IMPORTANT! The more tightly the belts are fastened around the
child, the better the protection. You should be able to fit no more than
one finger between the belts and your child. The belts should never
be twisted or damaged. When positioning the baby make sure that
he/she does not sit on the belts by hanging them to the side behind
the belt hooks. Hook the belt pad of the belt that goes between the
legs behind the edge of the quick adjuster. If you are unable to fasten
the harness belts properly or pull them tightly, contact your supplier
immediately. Do not use the baby car seat under any circumstances!
Removable seat insert
The baby car seat has a removable seat insert (E) to creat a flater
lying position for newborn babies and support the head in a sideways
direction. When the baby is (approx 4 or 5 months) remove the filling
block (F) to make the seat deeper, then you can still use the head
support.
25