Upgrade The Firmware - Yealink UVC86 Schnellstartanleitung

VCR20 Remote Control Instructions
No. Item
Tracking Long press the Tracking Mode key to switch among the auto framing, the
1
Mode Key speaker tracking, or off.
2 Mute Key Mute or unmute the microphone.
Navigation
3 Pan and tilt the camera to adjust the viewing angle.
Key
Scroll • Scroll up to zoom camera in.
4
Wheel • Scroll down to zoom camera out.
Preset • Long press the number key to add/update the preset position.
5
Key • Short press the number key to apply the preset position.
Volume
6 Adjust the volume.
Key

Upgrade the Firmware

• Use Yealink Room Connect/USB Connect software to upgarde the firmware
after connecting to the PC.
• In MVC system: The UVC86 can be automatically upgraded via windows
update by default. Otherwise, you should enable automatically windows update
or upgrade the devices manually.
• In video conference system: Upgrade it through the web user interface of
endpoint after UVC86 is connected to the endpoint.
For more information about how to upgrade the firmware, please refer to the
upgrading document.
Description
E
N
G
L
I
S
H
6