Volts Setup; Currency Setup; Tariff 1 Cost Setup - Profile ESD-1 Bedienungsanleitung

Once entering the DEG C/F SETTING mode, C or F will be displayed in the
middle row of the LCD and flash.
Press the ▲ or ▼ key to select the Celcius or Fahrenheit format for the
temperature display.
Pressing the SET key once will save the setting and go to VOLTS setting mode.
Note : If there is no key pressed within 10 seconds, the unit will return to
INSTANT mode without saving.

-- VOLTS setup

Once entering the VOLTS SETTING mode, 230 will be displayed and the Volts
icon in the middle row of the LCD will flash.
Press ▲ or ▼ key to select the suitable Voltage. The selection range is as
follows:
230v → 220v → 120v → 380v → 240v
Pressing the SET key once will save the setting and go to CURRENCY setting
mode.
Note : If there is no key pressed within 10 seconds, the unit will return to
INSTANT mode without saving.

-- CURRENCY setup

Once entering the CURRENCY SETTING mode, the ￡ icon in the middle row
of the LCD will flash.
Press ▲ or ▼ key to select the suitable currency for the cost display. The
display can be set to Pounds, Euros or Dollars:
￡ → € → ＄
Pressing the SET key once will save the setting and go to Tariff 1 COST setting
mode.
Note : If there is no key pressed within 10 seconds, the unit will return to
INSTANT mode without saving.

-- Tariff 1 COST setup

All manuals and user guides at all-guides.com