NEO TOOLS 90-122 Bedienungsanleitung Seite 8

NOTE: BEFORE THE POWER TOOL IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND KEEP IT FOR FUTURE
1. Detailed safety regulations
This equipment may be used by children at least 8 years old and by persons with reduced physical and mental abilities and persons who
are not familiar with the equipment, if supervision or instruction regarding the use of the equipment in a safe manner is provided so that
the threats were understandable. Children should not play with the equipment. Unattended children should not clean or maintain the
equipment.
WARNING! The device is used for indoor work.
When using electrical appliances, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons. These precautions include:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance directly into correct electrical outlet.
3. If the Filter is covered by a bag when shipped, remove plastic bag before use.
4. Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, solves, or
heaters.
5. To protect against electrical hazards, DO NOT immerse the appliance in water or other liquids. Do not use near water.
6. Close supervision is necessary when any appliance is used by or near children, or disabled persons.
7. Always unplug the air purifier before moving or cleaning the unit, opening the grill, changing the filter and whenever the unit is not in
use. To disconnect the unit, be sure to pull the plug and not the cord.
8. NEVER drop or insert any objects into the openings of the unit.
9. DO NOT operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged
in any manner, return appliance to manufacturer for examination and/or repair.
10. Use the appliance only for intended household use as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by
manufacturer may cause hazards.
11. DO NOT use outdoors.
12. NEVER place on a soft surface such as a bed or sofa as this could cause the unit to tip over an block the air inlet or outlet grills.
13. Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside
of the unit contains no user serviceable parts. All servicing should be performed by an authorized.
15. DO NOT place anything on top of unit.
16. NEVER use detergents, gasoline, glass purifier, furniture polish, paint thinner, or other household solvents to clean any part of the
appliance.
17. Always turn the appliance off before unplugging it.
18. This appliance should only be used in room with temperatures between 5°C and 45°C.
19. WARNING: To reduce the risk of fire or electric shock, DO NOT use the appliance with any solid-state speed control device.
Explanation of the pictograms used
1 2
a) Read the operating manual, observe the warnings and safety conditions contained in it!
b) Second protection class.
c) Do not disassemble the device yourself. All servicing should be performed by authorized personnel.
2. Product Structure
Welcome using our company air purifier ,before use please read this manual carefully to operate the product correctly
(Picture A)
1. Control panel
2. Outlet cover
3. Lamp
4. body
5. Filter
6. Base cover
3. Before first use
Placing the filters:
The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance. Remove all
filters, unpack them and place them back into the appliance as described below.
Note: Make sure you insert the filters in the correct position.
1. Put the appliance upside down on a soft cloth to avoid scratching, to open the base cover, you need to find an arrow point
corresponding the LOCK position, turn the base cover counter clockwise from LOCK to OPEN position, then the lock released. (Picture B)
2. Remove the base cover and take out the filter.
3. Remove the packaging material from the filter. (Picture C)
4. Put the filter back into the appliance. (Picture D)
5. Turn the base cover clockwise from OPEN position to LOCK position, you will hear a "click" sound, the base cover is fastened. (Picture E)
4. Using the appliance
About the control panel (Picture F):
1. On/Off
2. Filter reset
3. Speed
4. Auto mode
5. Auto mode
6. Timer
7. Air Quality & light
3
EN
REFERENCE.
on the base cover