Herunterladen Diese Seite drucken

Omnitronic DS-1 Montageanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DS-1 Distance Tube
No. 1035632
MOUNTING INSTRUCTIONS
EN
Please read these instructions carefully and especially observe the
safety information before attempting installation. You can find the latest
update online.
FEATURES
Connecting tube for satellite systems
?
Height adjustable 70-130 cm
?
Locking screw and bolt
?
For stand inserts with standard diameter (35 mm)
?
Powder-coated steel version
?
Color: black
?
SAFETY INSTRUCTIONS
This tube connects satellite and subwoofer speaker systems with
?
standard mounting flanges. The tube is adjustable in height and
designed for even load distribution of up to 35 kg. The tube is intended
for professional use, e.g. on stages, in discotheques, theaters etc.
Only use the product according to the instructions given herein, to
?
avoid accidental injury or damage.
We do not assume any liability for material and personal damage
?
caused by improper use or non-compliance with the safety
instructions. In such cases, the warranty/guarantee will be null and
void.
Unauthorized rebuilds or modifications of the product are not
?
permitted for reasons of safety and render the warranty invalid.
Danger to children – This product is not a toy. Keep it out of the reach
?
of children and pets. Do not leave packaging material lying around
carelessly.
Danger of tipping – Satellite systems may tip over and cause injuries
?
and property damage. Therefore keep the immediate area around the
satellite system clear and ensure that persons do not stand in this
area.
Install the stand only on even and solid surfaces (max. inclination 5°)
?
that can support the weight of the installation.
Do not move the installation while the satellite is mounted.
?
Make sure the load is evenly distributed on the distance tube and the
?
maximum load capacity specified is not exceeded.
Make sure that the installation complies with the standards and rules
?
that apply in your country. The product must be installed securely and
prevented from falling down.
The installer is responsible for adhering to the carrying capacity given
?
by the manufacturer, the safety requirements and the qualification of
possible co-workers.
This product is intended for indoor use only. Using it outdoors could
?
lead to product failure and personal injury.
After installation, this product requires inspections periodically to
?
prevent the possibility of rot, deformation and looseness.
Before taking into operation, check upon possible damages. If
?
defective, the distance tube must not be taken into operation.
All manuals and user guides at all-guides.com
MOUNTING
1 Insert the distance tube into the flange of the upper side of the
subwoofer.
2 Loosen the locking screw and pull out the tube to the desired height.
3 Insert the locking bolt through the openings and lower the tube until it
rests on the locking pin. Tighten the locking screw.
4 Mount the satellite speaker on top of the tube. If required, consult the
instructions of the satellite speaker.
Disassembly is effected in reverse order.
CLEANING
Use a soft, anti-static and lint-free cloth for cleaning. Do not use any
chemical or abrasive cleaning agents.
DISPOSAL
Comply with all applicable disposal laws in your country.
TECHNICAL SPECIFIATIONS
Max. carrying capacity: ....35 kg
Adjustable height:.............70-130 cm
Tube diameter: .................38/35 mm
Weight: ............................1 kg
Subject to change.
www.omnitronic.de
© 2017 Omnitronic. All rights reserved.
Omnitronic is a brand of Steinigke Showtechnic GmbH
Andreas-Bauer-Str. 5 • 97297 Waldbüttelbrunn Germany

Werbung

loading

Diese Anleitung auch für:

1035632