Menu Options; Dmx Linking - Chauvet DJ Intimidator FX 350 Schnellreferenzanleitung

Intimidator™ FX 350 QRG
Control Panel
Description

Menu Options

Main Level
DMX Mode
Operating Mode
Pan
Tilt
Display
Channel Mode
Manual Pan Range
Manual Tilt Range
Reset
Load

DMX Linking

Starting
Address
Master/Slave
Connection
All manuals and user guides at all-guides.com
Button Function
<MODE/ESC> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Programming Levels
d001–d512
NASL (SLoU)
NAFA (FASt)
NStS (SrUn)
SLAv (Son)
Pan
rPAn
tit
rtit
diS
rdiS
15CH
7CH
PA54
PA36
PA18
ti27
ti18
ti 9
rESt
LoAd
The Intimidator™ FX 350 can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 498.
The Intimidator™ FX 350 uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
Sets the DMX starting address
Automatic mode, slow program
Automatic mode, fast program
Sound-Active mode
Slave operating mode
Normal pan operation
Inverse pan operation
Normal tilt operation
Inverse tilt operation
Normal display
Inverse display
Selects the 15-channel DMX personality
Selects the 7-channel DMX personality
Selects the 540° pan angle range
Selects the 360° pan angle range
Selects the 180° pan angle range
Selects the 270° tilt angle range
Selects the 180° tilt angle range
Selects the 90° tilt angle range
Resets fixture
Load factory defaults
6
Description
EN