Kasanova PRO MID000001NOC Bedienungsanleitung Seite 26

ELECTRIC PRESSURE COOKER
26
15
16
17
18
19
20
21
22
STRUCTURAL DIAGRAM OF FLOAT VALVE
TIPS
1.
Confirm that the float valve, block proof cover and seal
ring are correctly installed before use each time;
2.
Before putting the inner pot into the cooker each time,
please remove the dirt and water from the external side
of the inner pot and internal side of the external pot;
3.
Please move the product with the handle of the cooker
body;
4.
Please remove the water from the housing cover with
cloth.
5.
Use the condensation collector, by installing it at the
rear of the pressure cooker, to collect liquids that may
be released from the pot and to keep your worktop cle-
an and dry.
NOTE:
•
Exhaust valve: Pull out the exhaust valve from the lid. Clean the internal side of the
exhaust valve and the exhaust valve and float valve of the lid with brush and cloth at
least once a month.
•
Sealing gate: Please remove oil and dirt from the sealing gate with detergent and
brush. The remained oil and dirt in it may appear in yellowish. After washing, it may
recover to the original color as stainless steel. It is suggest- ed to clean the sealing
gate once every 2 months.
•
Water box: After cooking, the steam may stay in the water box of the external pot
as water. Water in the box should be removed for avoiding bad odor, please clean it
with clean cloth.
Block proof cover
Inner pot
Outer pot
Cooker body handle
Cooker body
Power and socket
Condensation collector
Measuring cup