Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Original instructions
1. Declaration of Conformity
We, being solely responsible, hereby declare: these
routers, identified by type and serial number *1),
meet all relevant requirements of directives *2) and
standards *3). Technical documents for *4) - see
page 4.
For UK only:
We as manufacturer and authorized person to
compile the technical file, see *4) on page 3,
hereby declare under sole responsibility that these
routers, identified by type and serial number *1) on
page 3, fulfill all relevant provisions of following UK
Regulations S.I. 2016/1091, S.I. 2008/1597, S.I.
2012/3032 and Designated Standards EN
62841:2015, EN 62841-2-17:2017, EN IEC
63000:2018
2. Specified Conditions of Use
The router is suited for cutting wood, wood-like
materials and plastic.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Information
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Read the operating
instructions to reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Always include these documents when passing on
your power tool.
4. Special safety instructions
4.1
Safety instructions for routers
a) Hold the power tool by insulated gripping
surfaces only, because the cutter may contact
its own cord. Cutting a "live" wire may make
exposed metalparts of the power tool "live" and
could give the operator an electric shock.
b) Use clamps or another practical way to
secure and support the workpiece to a stable
platform. Holding the work by your hand or against
the body leaves it unstable and may lead to loss of
control.
4.2
Additional safety instructions
Wear a suitable dust protection mask.
Wear ear protectors.
Wear protective goggles.
Use an extraction unit!
Disconnect from the mains power before any
maintenance or service work!
The knob handle must always be tightened well
when working with the router.
Smaller workpieces must be secured in such a way
that they do not get loose when working with the
router (e.g. using screw clamps).
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
Keep your hands away from the rotating tool!
Remove debris and similar material only when the
machine is at a standstill.
Press the spindle locking button only when the
motor is at a standstill.
Materials that generate dusts or vapours that may
be harmful to health (e.g. asbestos) must not be
processed.
Check the workpiece for foreign bodies. When
working, always make sure that no nails or other
similar materials are being cut into.
Do not try to machine extremely small workpieces.
Reducing dust exposure:
WARNING - Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- crystalline silica from bricks and cement and other
masonry products, and
- arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals,work in a well-
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
This also applies to dust from other materials, such
as some timber types (like oak or beech dust),
metals, asbestos. Other known diseases are e.g.
allergic reactions, respiratory diseases. Do not let
dust enter the body.
ENGLISH en
11
Werbung
Inhaltsverzeichnis
