Wmtec HBL 1500 Bedienungsanleitung Seite 20

Confirming the Parameters
If all parameters have been set properly, they must be confirmed as follows:
Briefly press the "Enter" key
Use the "Up" and "Down" keys to switch from "NO" to "YES"
Briefly press the "Enter" key
Leaving the Settings Menu Without Changes
Press and hold the "Esc" key until the start display appears
The charger is in 'Easy-Go' mode.
Pause Mode
Press the "Pause" key during the charging process to activate "Pause"
To deactivate "Pause", press the "Pause" key again
In pause mode, a current-free interruption of the charging process is possible while charging.
After 1 minute, the charger will automatically switch back from the pause to the charging mode.
-20-