Sygonix SC-WM-200 Bedienungsanleitung Seite 3

Operating Instructions
SC-WM-200 2.4 GHz + Bluetooth Wireless Mouse
Item no: 2340778
1 Intended use
This item is intended to be used as a wireless mouse.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
Read the instructions carefully and store them in a safe place.
Make this product available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Mouse
■ TM
USB-C dongle
■
USB-A dongle
■ TM
USB-C to USB-A charging cable
■
Operating instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate import-
ant information in these operating instructions. Always read this information care-
fully.
5 Safety instructions
Read the information product carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appli-
ance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Never operate the product in direct proximity of strong magnetic or electromagnetic fields
or transmitter aerials or HF generators. Doing so can prevent the product from function-
ing properly.
www.conrad.com/downloads or scan the QR
5.4 Li-ion battery
■
The rechargeable battery is permanently built into the product and cannot be replaced.
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable bat-
tery might cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or
the product into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
■
Never charge the rechargeable battery of the product unattended.
■
When charging, place the product on a surface that is not heat-sensitive. It is normal that
a certain amount of heat is generated during charging.
6 Overview
1 4
2
3
5
6
1 Left button
3 Charging indicator
5 USB-A receiver socket
7 USB-C™ receiver
9 Power switch: ON/OFF
11 Indicator: 2.4 GHz / low battery / DPI
13 2.4 GHz and Bluetooth mode / con-
nection button
7 Charge the battery
Fully charge the battery before using the product for the first time.
The charging indicator flashes when the battery is low.
1. Connect one end of the cable to the USB-C
2. Connect the other end of the charging cable to a suitable power supply.
à LED OFF: fully charged.
à LED ON (constant): charging.
8 Pairing the mouse
Only one connection mode can be used at a time.
8.1 Bluetooth connection
Preconditions:
a
Your computer Bluetooth should be switched on and searching for new devices.
1. Slide the mouse power switch ON.
2. Press the mode button to select the Bluetooth connection method. An LED will light up to
indicate it has been selected.
3. Press and hold the mode button for 3 seconds to enable pairing. The LED will blink
slowly to indicate it is open for pairing.
4. Search the Bluetooth device list on your PC/mobile and select Bluetooth4.0Mouse" to
connect.
8.2 2.4 GHz connection
1. Connect the USB-A or USB-C receiver to an available port on your device.
2. Slide the mouse power switch ON.
3. Press the mode button to select the 2.4 GHz connection method. An LED will light up to
indicate it has been selected.
4. The mouse should automatically connect.
5. If the mouse does not automatically connect slide the power switch OFF.
6. While holding down the left and right mouse keys, slide the power switch ON to start pair-
ing.
9 DPI settings
Press and hold (scroll wheel + right mouse button) for approximately 3 seconds to cycle
through DPI settings.
■
The Bluetooth or 2.4 GHz indicator will blink to indicate the new DPI setting.
■
DPI (number of blinks): 800 (1x), 1200 (2x), 1600 (3x), 2400 (4x), 4000 (5x).
9
7
8
2 Scroll wheel
4 Right button
6 USB-C™ receiver socket
8 USB-A receiver
10 USB-C™ charging port
12 Indicator: Bluetooth / low battery /
DPI
TM
port on the product.
10
11
12
13
3