Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Warning - Bahco BMVAT1000 Bedienungsanleitung

Non contact voltage tester voltage absence tester
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
BMVAT1000
1. Feature
(1) High voltage category: CAT IV 1000V AC/DC
(2) Dual switch for protection & function switch
(3) Display range: DC 6V – DC 1000V, AC 24V – AC 1000V,
LCD resolution 1V
(4) Voltage bar graph to display the voltage range:
6/12/24/50/120/230/400/690/1000V
(5) Polarity test (the polarity indication LED lights up
when voltage approximate
(6) Phase test: 100V ~ 1000V
(7) Continuity test: 0 ~ 1.3MΩ, with LCD and buzzing
indication, and conducting current 5uA
(8) Non-contact voltage sensing: > AC 90V
(9) Auto power off
(10) Illumination for testing point
(11) Probe cap to protect user and test probe
(12) IP65

2. Safety Warning

Please read manual carefully before any operation. This
manual includes safety warning and safety requirement,
which help user to operate the equipment safely.
WARNING
is reserved for conditions and actions
that are likely to cause serious or fatal injury.
CAUTION
is reserved for conditions and actions
that can cause injury or instrument damage.
Follow the fish!
24V AC/DC.)
WARNING
• After measuring AC/DC voltage source for 3 minutes,
the tester must take a rest for 1 minute.
• Never measure the voltage beyond specified (1000V).
• Do not operate the equipment near flammable gasses.
• Never operating the equipment with wet hands.
• Keep hands and fingers behind the barriers during
measurements.
• Never unlock and open the battery case during
measurements.
• Confirm the function of the equipment with a known
source before measure unknown voltage source.
• Do not make any measurement when there is
abnormal condition, such as broken case or exposed
metal parts are present on the instrument, test
probes, and cables.
• Do not modify the equipment.
• Extreme caution when operating with a live circuit.
• LED only function properly when temperature is
between 0 ~ 50°C.
• Before using a voltage detector with audible indicator
at locations with a high background noise level, it
has to be determined whether the audible signal is
perceptible.
3. I
① M
② Ill
③ N
④ N
⑤ L
⑥ P
⑦ P
⑧ L
⑨ P
⑩ B
⑪ D
⑫ D
⑬ 2
LCD
① B
② V
③ P
④ H
⑤ D
⑥ A
⑦ D
⑧ D
⑨ V
2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis