Yourstory LB30 Benutzerhandbuch Seite 3

1. print your pages or photos and place
them in the spine of the album cover.
3. place the album cover, spine down,
into the yourStory Book Binder and
Laminator. push the cover down
until the spine touches the heating
element. press the up arrow
It will blink. Allow the album to rest
freely while binding (do not hold).
When you hear a beep and the up
arrow no longer blinks, the binding
process is complete (takes just over
1 minute).
Note: If a page is loose after binding is complete, simply repeat the binding process and ensure all pages
are all the way down into the spine. Binder will automatically turn off after 5 minutes of dormancy.
Warning: Binding element remains hot even when laminating feature is engaged. keep hands away
from heating element.
Binding Instructions
2. plug in the yourStory
4. Remove album cover from heating
again.
and Laminator. press the power
button . press the up arrow
wait for the power button
green (approximately 3 minutes).
element and place it spine down
in the cooling rack. Allow album
to cool 5 minutes or pages may
become loose.
Book Binder
™
and
to turn