IFM Electronic ecomat 200 Serie Betriebsanleitung Seite 9

Presetting
Press briefly.
1
Press this key to increment
2
Press this key to change
from one decade to the
3
when last decade is flashing
(= terminating entry).
Programming
The following parameters can be set (3rd column: basic setting):
counting function
0 = VRD (up / down differential; electronic and mechanical
P01
pulse pick-ups)
1 = VR (up / down; incremental shaft encoders)
control inputs for electronic or mechanical pulse pick-ups
P02
0 = pnp switching
1 = npn switching
decimal places
P03
0 ... 3 = 0 ...3 decimal places after the point
last value memory
0 = last value memory active
P04
(on power up the last value is displayed)
1 = last value memory not active
(on power up the preset value is displayed)
front reset
P05
0 = front reset active
1 = front reset not active
All manuals and user guides at all-guides.com
in active decade.
other.
Press briefly
Actual value is displayed,
first decade is flashing.
The active decade is flashing.
The new value is displayed.
1
0
0
0
0