Herunterladen Diese Seite drucken

Omnitronic SMARD-24RCA Bedienungsanleitung Seite 2

Digitaler dsp-controller

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

USER MANUAL
Thank you for purchasing this digital signal processor. The SMARD-24RCA is a
compact signal processor with 2 analog inputs and 4 analog outputs. Together
with the control software DXO Control for PC and Mac it offers a wide range of
options for programming and remote control of sound system. Please read these
operating instructions carefully before using the product. They contain important
information for the correct use of your product. Please keep them for future
reference.
SAFETY INSTRUCTIONS
Only use the product according to the instructions given herein. Damages due
to failure to follow these operating instructions will void the warranty! We do not
assume any liability for any resulting damage.
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. In such cases,
the warranty/guarantee will be null and void.
Unauthorized rebuilds or modifications of the product are not permitted for
reasons of safety and render the warranty invalid.
This product is not a toy. Keep it out of the reach of children. Do not leave
packaging material lying around carelessly.
IMPORTANT: This product is not an outdoor product! Only for indoor use! Do
not use this device near water.
Protect the product against excessive humidity and heat. The recommended
temperature is -5 to +45°C.
Do not touch the power cord and connectors with wet hands as it may cause
electric shock.
This product is maintenance-free, except for occasional cleaning. You can use
a slightly dampened cloth for cleaning.
Never open the product. If this product is no longer working properly or is
visibly damaged, take it out of operation and consult your local dealer. Do not
attempt to repair the product yourself.
PROTECTING THE ENVIRONMENT
When to be definitively put out of operation, take the product to a local
recycling plant for a disposal which is not harmful to the environment.
Devices marked with this symbol must not be disposed of as household
waste. Contact your retailer or local authorities for more information.
www.omnitronic.de
© 2018 Omnitronic. All rights reserved • Omnitronic is a brand of Steinigke Showtechnic GmbH • Andreas-Bauer-Str. 5 • 97297 Waldbüttelbrunn, Germany
All manuals and user guides at all-guides.com
SMARD-24RCA
DIGITALER DSP-CONTROLLER
INSTALLATION
Installing the DXO Control software
1. The software is available at: www.omnitronic.de > download section of the
product.
2. Download and install the software. Refer to the software's accompanying
documentation.
Connecting the computer
1. Connect the signal processor's USB port to your computer via the supplied
USB connection cable. If you have problems with the USB connection, please
refer to the guide for details on how to install the proper driver.
2. The signal processor is supplied with power via the USB port. An external
power adapter is optionally available.
3. Run the software.
4. Check if a firmware update is available when connecting the signal processor
for the first time.
5. Make the desired adjustments with the control software.
Signal connections
1. Always make input connections prior to applying power.
2. Connect the outputs from the signal sources (e.g. preamplifier, mixer) to the
RCA inputs IN L/R.
3. Connect the RCA outputs CH 1-4 to the inputs of the PA amplifiers. Always
make sure that your power amplifiers are the last item turned on and the first
turned off.
4. Once all of the connections have been made, you can control all aspects of the
signal path with the software.
TECHNICAL SPECIFICATIONS
Item no:
10356301
Power supply:
USB port or
6 V DC, 500 mA via power adapter (accessory)
Inputs:
RCA
Maximum input level:
+9 dBu
Dynamic range:
113 dBA
Outputs:
RCA
Maximum output level:
+6 dBu
Dynamic range:
103 dBA
Sampling frequency:
48 kHz
Frequency range:
20-20000 Hz
Filter types:
Bessel, Butterworth or L inkwitz-Riley
Slopes:
6, 12, 18 or 24 dB/octave
Crossover frequency:
20-20000 Hz
Delay:
0-2000 msec
Communication:
micro USB
Dimensions (WxHxD):
100 x 100 x 130 mm
Weight:
0.3 kg
Subject to change.
Publ. 02/2018

Werbung

loading