Xeecom VENTUS W040 Bedienungsanleitung Seite 2

VENTUS W040. Wireless Cooking Thermometer
Features:
• RF433MHz Wireless temperature transmission for convenient BBQ or oven cooking
• Main Unit with 3-Line LCD showing Cook Temp, Set Temp and Timer Clock
• 23 hr 59 min Timer on main unit
• 23 hr 59 min Timer on pager
• High Temperature Stainless Steel probe with 3 ft Teflon cable
• Compact wireless pager with temperature and timer functions
• Temperature alert for both transmitter and receiver
• Out of range alert , 100 ft transmission range
• Wide temperature range –10C to 200C
• Channel selection ensure interference-free operation
Battery Installation and Reception:
• Install 2 pcs AAA batteries to the main unit and the pager respectively
• To turn on the main unit and then the pager, slide the power switch of both units to ON position
• Slide the alarm switch to ON position to turn on the beeper for the main unit and pager.
• If the receiver failed to receive signal from the transmitter, the "RANGE OUT" icon will appear and the
beeper will sound with a single long beeping. To disable the alarm, slide the alarm switch to OFF position.
RANGE OUT icon will disappear immediately when transmission resume to normal.
• To change C/ F for the pager hold the "MODE" button 2 seconds.
Name/ Function of Buttons
1. Main Unit:
Button
MODE
+ , HR
– , MIN
START/STOP
ON/OFF
All manuals and user guides at all-guides.com
Press function
Select Timer/ Clock
Temp advance, HR advance
(press hr + min when timer stopped = clear timer)
Temp backward, MIN advance
timer start/ stop
slide switch turn power on and off
(Clock still run when power is turned off)
Hold 2 seconds
Clock set
Fast advance
Fast adjust
1