Solid State Logic Duende PCIe Installationsanleitung Seite 5

Safety and Installation Considerations
This section contains definitions, warnings, and practical information to ensure a safe working environment.
Please take time to read this section before installing or using this unit. Please do not dispose of these instructions.
General Safety
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Do not expose this apparatus to rain or moisture.
• Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
• There are no user-adjustments, or user-servicable items, on this apparatus.
• Adjustments or alterations to this apparatus may affect the performance
such that safety and/or international compliance standards may no longer
be met.
All manuals and user guides at all-guides.com
Caution
• To reduce the risk of electric shock, do not perform any servicing other than
Installation Notes
• When installing this apparatus, place the host system into which it is to be
• To prevent damage from static electricity when installing this apparatus,
• Take care of rough or sharp edges when accessing the inside of the host
• Never install or remove this apparatus whilst the host system is powered.
• If in doubt about installing this apparatus, please refer to qualified service
that contained in these Installation Instructions unless you are qualified to
do so. Refer all servicing to qualified service personnel.
installed on a secure level surface.
either to the host system or to this apparatus, always take proper anti-static
precautions. Always use an anti-static wristband. If in doubt, please refer to
qualified service personnel.
system.
Always remove the power cord from the host system prior to accessing this
apparatus.
personnel.
EN
D
FR
ES
IT
1