Master Time DCF77 Bedienungsanleitung Seite 2

INSTRUCTION MANUAL
Main Features
1. Six function keys: SET, ALARM, UP.DOWN, WAVE, SNOOZE.
2. Time, Calendar, Day and Temperature Display. 3.12/24 hour format options.
4. C/F temperature format options (scope of -9.9C-50.9C, accuracy +/- 0.1C).
5. Alarm, alert setting.
6. Snooze function with 5 minute time delay.
7. Radio controlled - DCF version.
8. Daylight Saving Time (DST).
9. LED backlight.
DCF Radio Controlled Alarm Clock
Automatic Time Keeping
Accurate to 1 second in 10 million years
Automatic resetting to summer /winter time
Congratulations on your purchase of this quality Radio Controlled product.
Great care has been taken to design and manufacture your clock. Please read these instructions
and keep them safely as you may wish to refer to them In the future.
The clocks will set up automatically once you have Inserted the battery.
Battery insertion/replacement
1.Remove back cover.
2.Remove/insert 2 x AAA batteries following the correct polarity.
3.Replace back cover.
4.Clock automatically starts searching for signal.
Default setting after power on: 24 hour display format, 1st January 2018, Monday and temperature in C format.
Normal Mode
1. Press SET button for 2 seconds to enter Time setting mode.
2. Press ALARM button to torn on/off alarm.
3. Press ALARM button for 2 seconds to enter Alarm setting mode.
4. Press DOWN button to switch temperature format of C/F.
5. Press WAVE button to enter RCC mode.
6. Pres SNZ button to activate snooze function of 5 minute time delay.
Signal (wave) receiving
1. After inserting batteries or reset, the clock automatically searches for signal.
2. To force automatic signal reception, press the WAVE button for 2 seconds.
3. If the signal is still not found then follow manual time setting instructions.
4. The time signal is received automatically at every 1.00am, 2.00am, 3.00am, 4.00am, 5.00am. It receives the time at 1.00am, 2.00am and 3.00am. if the time is not received
until 3.00am, then it continues to receive the time at 4.00am. if this is successful, the it will not receive the time again on the same day. If unsuccessful then the time is
received at 5.00am, it will not be received again the same day. The receiving will take at the most 7 minutes each time
5. Wave feature - as before...
MANUAL TIME SETTING
1. Press the SET button for 2 seconds.
2. The setting item twinkling at 1 HZ frequency.
3. The setting sequence is: 12/24 hour -Time Zone - Hour - Minute - Year - Month – Date - Weekday
4. Press UP or DOWN once to increase/decrease values by one, continually holding will enter fast advance.
5. Press SET to confirm setting.
6. During setting, press WAVE to exit setting mode and the values will be saved whilst entering RCC mode.
7. Without any operation in 30 seconds, the setting mode quits and the setting values will be saved.
ALARM SETTING
1. Press the ALARM button for 2 seconds.
2. The setting item twinkling at 1 HZ frequency.
3. The setting sequence is: Hour- Minute.
4. Press UP or DOWN once to increase/decrease values by one, continually holding will enter fast advance.
5. Press ALARM to confirm setting.
6. During setting, press WAVE to exit setting mode and the values will be saved whilst entering RCC mode.
7. Without any operation in 30 seconds, the setting mode quits and the setting values will be saved.
8. Press ALARM to turn on/off.
Alarm for 2 minutes in BUZZER format:
1.0-10 seconds: beep once each second
2.10-20 seconds: beep twice each second
3. 20-30 seconds: beep four times each second
4. After 30 seconds: serial beep
This product equates to the EMV guidelines of the EU.
Stand 10/2018