Troubleshooting - Inakustik 00415001 Gebrauchsanleitung

All manuals and user guides at all-guides.com
U S E R ´ S G U I D E
Prior to connecting the external DC power , please check and ensure that your external USB power adaptor outputs DC 5V /
500mA~1,000 mA and conforms to the power supply in your area.
Never attempt to connect the DAC to the incorrect voltage.

TROUBLESHOOTING

DAC not powered on...
- Check and see if the USB cable is properly plugged into both the computer and the DAC.
No sound come out the system...
-Check and see if the interconnect cables are properly connected to the respective sockets of the DAC.
-Check and see if the correct input mode (OPTICAL, COAXIAL or USB ) is properly selected.
-Check and see if the source is switch on.
-Check and see if the equipment following the DAC is switched on and correctly set up.
-Check and see if the application software is configured to use DAC as its audio output.
Windows 98SE...
-Windows 98SE does not have USB audio system files. These files are not a part of the core installation of the Windows 98SW. The necessary system
files are on Windows 98SE CD-ROM. They need to be added.
Incompatible Dolby Digital or DTS audio format...
-This DAC is not compatible with Dolby Digital or DTS formats, which are both forms of compressed audio. Extreme caution should be exercised
when you play back CDs or DVDs encoded in Dolby Digital or DTS. If you
play back them, you will only hear some unwanted noise that may damage your speakers.
-You need to get into the menu settings of the device and adjust Dolby Digital or DTS to PCM. This DAC works with any PCM stream from CD players,
DVD players, game consoles and set-top boxes.
Note:
Do not plug out while application programs were playing music files. Otherwise, incorrect plug out will cause application program or system crash.
The right way to plug out any USB Audio device is stop playback function first. Please always stop playback before plug out USB cable.