Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.
Installation and start-up
For the use of the heat transmission unit, the Glatz electrical kit is required.
10
eizstrahler Einheit 1500 W
H
Heat transmission unit 1500 W
Unité de transmission de chaleur 1500 W
Unità emittente di calore 1500 W
Fasten coupling flange to the heat transmission
unit.
Coupling flange
Insert
Fasten quick-fit coupling to the sunshade frame
where suitable. For an installation on reinforced
rods, remove the insert. Insert heat transmission
unit (with coupling flange) into the quick-fit
coupling (see 6.1)
Cut the cable to length so as to obtain a
sufficient cable length for the sunshade in
opened or closed and all intermediate conditions.
Execute the electric connection accordin
Cut the cable in a position suitable for the
insertion of the connecting plug.
For a daily removal of the heat transmission unit,
it is recommended to cut the cable close to the
heat transmission unit.
If the heat transmission units are to remain on
the sunshade for long periods of time and then
to be removed for long periods of time, it is
recommended to cut the cable close to the
sunshade pole.
It is also possible to fit a cable connecting socket
in both spots.
10.2006-DEFI
Werbung
