Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Crankshaft Pulley Holding Tool for Honda, 50 mm
Suitable for example:
Honda Accord 1.8 / 2.0 / 2.2 V-TEC
Honda Accord Coupe/ Aerodeck 2.0 / 2.2
Honda Accord 2.3 (1993-2003)
Prelude 2.0 (1997-2003)
Shuttle 2.2i / 2.3i (1995-2001)
Engine code: F18A3, F18B2, F20B3,
F20B6, F20Z1, F20Z2,
F20Z3, F22B5, F22B6
F22Z2, F23Z5, F20A4,
F20B5, F22B8, F23A7
INTENDED USE
This special tool is used for counter-holding the crankshaft pulley when loosening / tightening the
pulley central bolt, for fixing the balancer shaft and it is to be used as OEM 07JAB-0010200 /
07JAB-0010202B.
SAFETY ADVICE
•
Do not use the tool for other purpose for which it is intended.
•
Check the tool for damage before using, do not use the tool if it is damaged.
•
Keep children and other persons away from work area.
•
Never allow children to play with the tool or its packaging.
•
When using this tool pay attention to a safe stand.
USE
Insert the tool in the inner hexagon of the crankshaft pulley (A).
The central bolt of the crankshaft pulley can be loosen and thighten by using a suitable socket
through the bore of the tool (B).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
50 mm outer hexagon
A
B
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9786
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Werbung
