Operating The Fan; Cleaning And Maintenance - Inventum VTO752W Gebrauchsanleitung

3

operating the fan

Place the tower fan on a flat, stable surface. Insert the plug in a socket.
SWITCHING ON / OFF -
Check that the timer button is on the ON position and press one of the position
buttons 1 to 3 to switch on the fan.
Switch off the fan with the position button OFF
OFF off
Position 1 lowest setting
Position 2 middle setting
Position 3 highest setting
ADJUSTING THE TIMER
Turn the timer button to set the correct time period. The maximum is 120 minutes. Once the set time has passed, the fan
stops. You can terminate the set time by turning the button back.
OSCILLATION -
This fan is able to oscillate (swerve to the left and right) for a better air displacement.
Press the oscillation button so that the fan starts to oscillate.
The entire fan will oscillate now, towards the left and towards the right.
4

cleaning and maintenance

Before cleaning the fan, you must switch it off by pressing position button OFF and remove the plug from the socket.
• Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
• If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the fan in water or any other liquid.
12
• English
, not with the timer button.
on
120
off
90 30
60