mrSafe KB-350 Bedienungsanleitung

PACKAGE CONTENTS
Kinetic Push button + 230 V Receiver + Mobile Receiver + industrial tape
PARTS & BUTTONS
Mobile Receiver
Kinetic Push button 230 V Receiver
E: ON / OFF switch
B: Power Plug
A: Push button
F: Battery Compartment
C: Tone selection button
G: Tone selection button
D: Volume
H: Volume
INSTALLING AND PAIRING THE KINETIC PUSH BUTTON
You can fix the Kinetic Push Button to any surface using the industrial tape or screw it on the wall. Take
the plastic plate with the 2 screw holes and hold it against the wall you wish to attach it to. By using a
pencil, indicate where you need to drill the holes. Drill 2 holes where the indication is visible. Insert 2
plugs into the holes, place the plastic plate in the correct location and screw it in place. Place the front
of the Push button on the back part until it clicks into place.
You can pair multiple Push buttons (optionally available on www.mrsafe.eu) with the receivers. Simply press
the Tone selection button (C, G) on the 230 V Receiver or on the Mobile Receiver for 5 seconds until you hear
a double sound notification. Press the Push button (A) and you will hear another sound notification. After 10
seconds, you will hear another double sound notification. Your devices are now paired.
INSTALLING AND PAIRING THE 230 V RECEIVER
You can plug the 230 V Receiver into any socket in your house, the pairing for your set has already been
done during production.
To pair an extra 230 V Receiver with your Push button (optionally available on www.mrsafe.eu), press the
Tone selection button (C) for 5 seconds until you hear a double sound notification. Press the Push
button (A) and you will hear another sound notification. After 10 seconds, you will hear another double
sound notification. Your devices are now paired.
INSTALLING AND PAIRING THE MOBILE RECEIVER
Before installing the Mobile Receiver, insert 3x AA Alkaline batteries into the Battery Compartment
(F). Open the cover of the battery compartment. Insert 3 AA Alkaline batteries according to the visible
scheme and close the cover. You can take the Mobile Receiver anywhere in your house (up to 150 m),
the pairing for your set has already been done during production.
To pair an extra Mobile Receiver with your Push button (optionally available on www.mrsafe.eu), press
the Tone selection button (G) for 5 seconds until you hear a double sound notification. Press the Push
button (A) and you will hear another sound notification. After 10 seconds, you will hear another double
sound notification. Your devices are now paired.
SELECTING A RINGTONE AND ADJUSTING THE VOLUME
To select a ringtone on either the 230 V Receiver or the Mobile receiver, press the Tone selection button
of the device (C, G) until you hear the ringtone you wish to select.
Note: If you wish to have the same ringtone on both devices, you have to set it for each device separately.
Note: When multiple Push buttons are paired to your device, it is not possible to have a separate sound
for each Push button.
To adjust the volume on either the 230 V Receiver or the Mobile Receiver, first, press the Tone selection
button of the device (C, G) to hear a tune and press the Volume button of the device (D, H) to select
the desired volume.
SUPPORT
For more information, technical questions and return requests concerning this product, you should
contact support@mrsafe.eu
WARRANTY
Mr Safe is a registered trademark of TE-Group NV. The mr Safe brand stands for good product quality and
outstanding customer service. That is why mr Safe warrants this product against all defects in material
and workmanship for a period of two (2) years from the date of original purchase of the product. The
conditions of this guarantee and the extent of responsibility of mr Safe under this guarantee can be
downloaded from our website: www.mrsafe.eu
DECLARATION OF CONFORMITY
GB
Hereby, Par la présente,
Company /Entreprise:
TE-Group NV
Kapelsestraat 61, 2950 Kapellen, Belgium
Address: / Adresse:
declare that the following equipment: / déclare que le dispositif suivant :
Product name:
mr Safe KB-350
Nom du produit:
Product type:
Wireless Kinetic Doorbell Set
Type de produit:
conforms with the following safety requirements of the directives 2014/53/EC, 2011/65/EC, 2014/30/EC,
2014/35/EC & 2015/863/EU. Conformity is guaranteed by the CE-symbol. This product has been tested against
following standards and specifications. The full text of the EU declaration of conformity is available at the
following internet address: http://www.mrsafe.be/DOC_KB-350.
est conforme aux exigences de sécurité suivantes des directives 2014/53/EC, 2011/65/EC, 2014/30/EC, 2014/35/
EC & 2015/863/EU. La conformité est garantie par le symbole CE. Ce produit a été testé par rapport aux normes
et spécifications suivantes. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet
suivante: http://www.mrsafe.be/DOC_KB-350.
EN62321-1,2,3,4,5,6,7,8:2015 EN301489-1 V2.2.3:2019
EN62368-1:2014+A11:2017 EN301489-3 V2.2.1:2019
EN330220-2 V3.2.1 EN62479:2010
EN300220-1 V3.1.1:2017 EN50663:2017
EN300220-2 V3.1.1:2017
J. Van Os, Product & Research Manager
Authorized Signature, Kapellen - January 2021
ILLUSTRATIONS
KB-350
WIRELESS DOORBELL SET
USER'S MANUAL
NL
GB FR
QRG/MrSafe iBell KB-350/01-21/V01
Copyright©Mr Safe
D