Mounting The Seat Post - SXT-Scooters VELOX MAX Handbuch

Mounting the seat post

1. Loosen the saddle clamp to mount the saddle.
3. Loosen the saddle clamp, set the saddle to a suitable height
and tighten the clamp.
Commissioning
2. Tighten the saddle clamp as shown. Then press down on the
saddle to make sure it stays tight.
4. Make sure that the saddle clamp is within the limit screw and the
max. height line, otherwise there is a risk that the seat post will not
fit tightly.
38
Limiting screw
Maximum contour line