Wireless & Networks - WOXTER X70 Bedienungsanleitung

28
User manual Woxter X70
Copy the document to storage card
» Connect Woxter X70 and computer together with USB cable.
» After setting according to storage of Woxter X70, connect with compu-
ter successfully.
» Open your computer, in my computer; examine content in "removable
disk (x)".
» Find the document you want to copy, copy it to "removable disk(x)".
» After completion of copying, click "safely remove hardware" in taskbar
of your computer to unload.
Content of Woxter X70 storage device
» NAND FLASH storage device, space for Woxter X70 to store document
itself.
» TF removable memory card.
» The two above-mentioned storage devices both can be visited through
connection with your computer with USB.
Attention: when your Woxter X70 is connected with USB cable, if you start up
USB storage device, you will cannot visit the memory card through Tablet, if
you want to visit memory card in Woxter X70, only disconnect USB cable.
3.7 Memory card
Copy the document to storage card
You can transmit document between Woxter X70 and computer, such as
music and picture, etc. If you want to see documents in Woxter X70, only
click the file browser to look through content in the SD card.
Delete documents on the storage card of Woxter X70
» Find document you want to delete.
» Press the document name you need to delete; a file menu will pop up.
» Click delete.
Removing storage card when the Woxter X70 is in starting up state
If need to remove storage card under starting up state of Woxter X70, you
must unload the storage card firstly for fear of failure or damage of the
storage card.
» In the homepage interface, press the menu key, and then click setting.
» Pull the setting menu downwards, and then click storage.
» Click SD card setting.
» Click to uninstall the SD card.
4. Wireless networks
4.1 WIFI Connection
Your Woxter X70 can be connected onto Wi-Fi network to connect the
operation:
» On the homepage interface, click and select the menu key and pop up
the menu setting;
» Click and select the System Setting;
» Click Wi-Fi and open Wi-Fi switch;
» After opening Wi-Fi, the searched Wi-Fi network can be scanned auto-
matically from the equipment in the windows on the right.
» Select the Wi-Fi network required to be connected, if the password is
added, pop up the password input windows and input the correspon-
ding password.
» Click the Connection
>> woxter.es
English
Figure 4-1
>> woxter.es
29