Electrical Safety - Diamond3 MX11 Bedienungsanleitung

HAND MIXER MX11
Never let other persons, especially
l
children. touch the machine or cables.
Switch the machine of when other
l
persons, especially children, are in the
immediate vicinity of your working
area.
The operator is responsible for
l
accidents and risks threatening other
persons or their property.
Children, persons younger than16
l
years and persons that have not read
this manual are not allowed to operate
this machine.
Never leave this machine unattended.
l
Only operate the machine with
l
complete and correctly attached safety
equipment and do not alter anything
that could impair the safety.
Do not alter the machine or parts of the
l
machine.
Switch the machine OFF and
l
take the plug out before
carrying out:
− repair work
− maintenance- and
cleaning work
− eliminating faults
− checking tangled or damaged
cables
− transport
− unusual sounds or vibrations
Maintain your machine with care:
l
− make sure the ventilation openings
are clean.
− make sure the grips are free of
grease and oil.
Check the machine for possible
l
damage
− Before use check all safety devices.
Make sure they are installed correctly
and function properly.
− Check the machine for damaged
parts. All parts must be mounted
correctly to ensure proper functioning
of the machine.
All manuals and user guides at all-guides.com
l

ELECTRICAL SAFETY

l
l
l
l
l
l
l
l
17
− Damaged protective devices and
parts should be repaired or replaced
by an authorized serice center.
− Damaged or illegible safety stickers
should be replaced.
Store your machine in a dry, locked
space out of reach of children.
The cable should comply with IEC
60245 (H 07 RN-F) and should have
a diameter of at least:
3 x 1,5 mm² for lengths up to 25 m.
3 x 2,5 mm² for lengths over 25 m.
The use of long or too thin cables will
result in a loss of power. The
performance of the motor will be
reduced.
Plugs and sockets should be made out
of rubber, PVC or another thermoplastic
material with the same density or be
coated with such a material.
Electrical connections should be splash
water proof.
Prevent cables and extension cords
from getting tangled, stuck or bent and
make sure connections do not get wet.
Completely unwind cable drums.
Check extension cords for damage
regularly and replace when
neccessary.
Do not use damaged cables.
GB