Troubleshooting - Wörlein soundmaster CD9220 Bedienungsanleitung

Problem
No power,
playback does not
start
Hold indication and/
or no reaction to
controls
No sound or bad
sound quality
„dISC" / „Err"/ error
message
Music is not played
Missing directories on
MP3-CD
The disc skips tracks – Clean or replace the disc.
Music skips or
popping sound when
playing an MP3 file
Technical changes and misprints reserved.
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Duplication only with the permission of Woerlein GmbH.

Troubleshooting

Solution / Cause
– Insert the batteries correctly.
– Replace the batteries.
– Connect the mains adapter securely.
– Deactivate HOLD.
– Disconnect the set from the power to controls supply or take out the
batteries for a few seconds.
– Press
to resume playback.
– Adjust the volume.
– Check and clean the connections.
– Keep this set away from active mobile phones or strong magnetic
fields.
– Insert a disc, label upwards.
– Clean or replace the disc.
– Wait until the steamed up lens has cleared.
– Make sure you have inserted an audio disc or an MP3/WMA-CD.
– Make sure the inserted CDR or CD-RW is recorded correctly.
– Make sure that the file names of the MP3 files end with .mp3 /
WMA files end with .wma
– Make sure the total number of files and albums on your MP3/WMA-
CD does not exceed (MP3+WMA) 600 and (CD) 99 respectively.
– Only albums with MP3 files are shown. Other computer data file is
skipped.
– Make sure REP, INTRO, RND, ALL or PROG are not selected.
– Play the music file on your computer. If the problem persists, encode
the audio track again and make a new CD-ROM.
www.soundmaster.de
CD9220 / English Instruction Manual
8