Werbung
Using the device
Note! Charge device before first use by car charger
or USB power source. Fully charging takes about 2
hours.
Install microSD card and power on the device. Whenev-
er USB power source is connected device will power on
automatically and start recording onto microSD card.
To stop or start recording manually press OK button.
When device is not recording you can enter menu op-
tions, press MENU button.
Use MODE button to switch between modes (DVR,
snapshot, playback).
Use UP and DOWN button to navigate in menu, use OK
to enter/confirm changes.
Use button set actual recorded video sequence as
read only. When device is not recording you can press
this button to start recording a sequence with read
only attribute.
Menu options
Resolution: HD | VGA
Time Stamp: On | Off
Motion Detect: On | Off
Audio Record: On | Off
All manuals and user guides at all-guides.com
Record Time: 2min | 5min | 10min
Format: Yes | No
Language: select language from list
Time Setup: select Yes and enter actual date and time
Frequency: 50Hz | 60Hz
IR Led: Always On | Auto| Off
LCD display: Always On | 30sec | 60sec
Default setting: Yes | No
DVR function
Power on the device manually or plug car charger.
Device will start recording video sequence in a loop
– when there is no space onto microSD card the old-
est file will be overwritten by a new one. To secure se-
quence before deleting press button during record-
ing. Unplug car charger to power off the device.
Snapshot mode
When device is not recording press MODE button to
switch into Snapshot mode. Press OK button to take
snapshots.
Playback mode
When device is not recording press MODE button twice
to switch into playback mode. Select icon and press OK
button to play sequence. You can use UP and DOWN
button to adjust volume.
EN
3
Werbung
