How To Install The Product - Axis Communications T90D Installationsanleitung

AXIS T90D Illuminators

How to install the product

This installation guide describes an installation where the illuminator is controlled by the photocell.
For AC/DC versions only the red and the black cable are required for the installation. For more
information about settings, options and the telemetry cables, see the User Manual available at
www.axis.com
To install the product using a compatible bracket from AXIS T90D mounting accessories, see the
Installation Guide delivered separately with the mounting bracket.
1
Illuminator
2
Power, photocell and telemetry for AC/DC versions or network cable for PoE
versions
3
Power Source Equipment (PSE)
Follow these installation procedures:
1. If required, remove the screws and move the standard bracket to the top of the
illuminator.
2. If required, loosen the screws and turn the bracket 90°.
12