Werbung
Bracket: How to Remove the M.2 SSD (Type 2280) and the Bracket
B1
w to Install the Bracket for a M.2 SSD (Type 2280) /
如何移除2280 M.2 SSD及其托架
How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket
for a M.2 SSD (Type 2280)
1. Release the screw and carefully remove the M.2
2. Release the screw and remove the bracket
SSD (Type 2280).
from the motherboard.
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
2. Attach the HDD cage to the bottom panel
1. Remove the four screws on the bottom case.
and secure it using the four screws.
en li up and remove the bottom panel.
connect the SATA cable to the HDD.
4. Connect the SATA Cable to the connector.
5.
en reinstall the bottom panel.
*For iBOX 1100 Series, it is not recommended to install 2.5" HDD. If you install the 2.5" HDD, please keep the iBOX 1100 Series
in a vertical position to ensure better cooling performance.
SO-DIMM Slots: How to Install the Memory Modules
D
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
2. Push down until the modules snap into place.
into the slot at a 30-degree angle.
3. Connect the SATA Data and Power Cable to
the HDD.
en
(DDR4 Low Voltage (1.2V))
Note:
-
e iBOX 1100 Series requires DDR4
SO-DIMM (1.2V).
- For dual channel con guration, you always need to
install identical (the same brand, speed, size and
chip-type) DDR4 SO-DIMM pairs.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
iBOX 1100 Series.
/
Positions of the iBOX 1100 Series
iBOX 1100 系列擺放 / Positionen der iBOX 1100 Series / Positions de la série iBOX 1100 Series / Posizioni della iBOX 1100 Series / Posiciones de la iBOX 1100 Series /
iBOX 1100 Series / Posições de iBOX 1100 Series / iBOX 1100 Series 시리즈의 위치 / iBOX 1100 Seriesシリーズの位置
e iBOX 1100 Series can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the iBOX 1100 Series in a vertical position will ensure better cooling performance.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
2. Attach the VESA Bracket to the rear of
3. Mount the iBOX 1100 Series by sliding it
a compatible display using the four screws.
into place.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
VESA-mounted
Werbung
