Inhaltsverzeichnis
Werbung
Manufacturer:
Neles Flow Control (Jiaxing) Co., Ltd.,
Jiaxing Economic and Technological
Development Area, Zhejiang Province,
China
Neles India Private Limited
560, Manpada Road, Near Bhopar Village, Dombivli East,
Maharashtra, 421204,
India
Product:
Pneumatic actuator
Type:
RNP-series (Rack and Pinion)
ATEX group and category:
Protection concept of non-electrical equipment
80°C:
125°C:
ATEX 2014/34/EU Annex VIII technical files are archived by Notified Body number 0598.
Manufacturer's certificates:
Standard / Directive
ISO 9001:2015
PED 2014/68/EU Module H
ATEX 2014/34/EU Annex IV (China)
EN ISO 3834-2
AD 2000-Merkblatt HP 0
Applicable Directives:
Machinery 2006/42/EC Annex IIB
ATEX 2014/34/EU
As the products within our sole responsibility of design and manufacture may be used as parts or components in machinery
and are not alone performing functions as described in Article 6(2) of Machinery Directive 2006/42/EC, we declare that our
product(s) to which this Declaration of Conformity relates must not be put into service until the relevant machinery into which it
is to be incorporated has been declared in conformity with the provisions of the Machinery Directive.
The product above is manufactured in compliance with the applicable European directives and technical specifications/
standards. The product is in conformity with the customer order.
Non-electrical equipment is according EN 80079-37 and EN 80079-36. The actual surface temperature of non-electrical
equipment is depended on the process and ambient conditions (EN 80079-36 § 6.2.5 and 6.2.7). The protection from high or
low temperature must be considered by the end user before put into service.
Protection from e.g. static electricity caused by the process or connected equipment must be considered by the user (EN
60079-14 § 6). Follow the caution instruction in identification plate sticker.
The product does not possess any residual risk according to hazard analysis conducted under the applicable directives
providing that the procedures stated by the IMO (Installation, Maintenance and Operating) instructions manual are followed
and the product is used under conditions mentioned in the technical specifications.
.
Vantaa
Juha Virolainen, Global Quality VP
IMO-218 DE - Issue 6/2021
EU DECLARATION OF CONFORMITY
Notified Body
DNV-GL
DNV-GL
Presafe
TÜV Rheinland
TÜV Rheinland
12.10.2020
II 2 GD
Ex h IIC T6 Gb/ Ex h IIIC T85°C Db
Ex h IIC T6...T4 Gb/ Ex h IIIC T85°C...T120°C Db
Certificate No.
73538-2010-AQ-FIN-FINAS
0496
142306-2013-CE-FIN-ACCREDIA
2460
Presafe 18 ATEX 91983Q Issue 1
01 202 644/A-19 B056/01
01 202 644/A-19 B056
Applicable parts
Non-electrical equipment
27
Werbung
Inhaltsverzeichnis
