Advanced Features - Alesis Prestige Artist Benutzerhandbuch

Advanced Features

Metronome
The metronome feature provides a steady beat to aid in practicing at a consistent tempo. To
turn the metronome on or off, press the Metronome button. While the metronome is in use, the
Metronome button LED will flash along with the current tempo. The tempo of the metronome
can be freely adjusted from 30 to 280 beats per minute.
Note: The metronome cannot be used during Demo playback.
1. To enable the metronome, press and release the Metronome button.
2. Turn the Value Encoder to select one of the following parameters and then push the Value
Encoder to select the parameter's data for editing.
•
Tempo: Adjusts the tempo for the metronome.
•
Time Signature: Selects which time signature to use for the metronome.
•
Volume: Adjust the volume for the metronome between 1 and 5. 1 is the lowest volume,
and 5 is the loudest.
3. Push the Value Encoder to deselect the parameter data when you're done, and change the
cursor focus back to choosing another parameter.
4. Press and release the Start/Stop button to start/stop the metronome.
5. To disable the metronome, press and release the Metronome button or press and release
the Start/Stop button.
9