Elko EP ZSR-30 Kurzanleitung Seite 3

ELKO EP, s.r.o.
Palackého 493
769 01 Holešov, Všetuly
Czech Republic
Tel.: +420 573 514 211
e-mail: elko@elkoep.com
www.elkoep.com
Made in Czech Republic
02-206/2016 Rev.: 2
Characteristics
Regulated stabilized power supply ZSR-30
- supply of various devices and appliances by safe voltage with fully galvanic sepa-
ration from the main.
- input voltage: AC 230 V
- output voltage: DC 5-24 V stab., DC 24 V unstab. and AC 24 V
- exceeded current limit values is indicated by LED fl ashing
- when there is full short-circuit, output is disconnected, output - current is limited
by an electronic fuse
- 3-MODULE, DIN rail
Power supply ZNP-10
- AC and DC output voltage 24V, non-stabilized
- power supply with fi xed output voltage
- protection against short-circuit and overload by a safety fuse
- input voltage: AC 230 V
- 3-MODULE, DIN rail mounting
Description
ZSR-30
1
2
3
4
ZNP-10
1
3
4
1. Supply terminals
2. Setting of output voltage DC
3. AC output voltage
4. DC unregulated output voltage and
unstabilized
5. DC output regulated voltage and
stabilized
5
ZSR-30
ZNP-10
Power supply
Connection
ZSR-30
PRI
AC AC
DC
DC REG
- -
+ +
SEC DC REG
WARNING!
Total loads on all output terminals may not exceed this values:
by supplying 230V... 253V - 8W
from 230V... 207V output power is eaqualy decreesing onto 5W
1 / 2
ZNP-10
PRI
AC
DC
- -
+ + +
SEC DC DC
EN