Herunterladen Inhalt Inhalt Diese Seite drucken

Wichtige Hinweise - RCS ESP-700A Bedienungsanleitung

Inhaltsverzeichnis

Werbung

ESP-700A
FAIlURE INDICATOR CONTACT
Allocation of the 5-pin DIN socket
ERROR MESSAgE
Normal mode:
Contact between Pin 2 and 1
Failure:
Contact between Pin 2 and 3
IMPORTANT DETAIlS
First using of the storage batterys
• Please insert or connect the storage batterys only directly
before line-up of the device ESP-700A.
• Charge the storage batterys completely after installati-
on or connection and before line-up of the system with
ESP-700A.
• Please connect external consumers, that are operated
at the unswitched 24-Volt output (unswitched out) of the
device, only directly before line-up. (Accumulators can be
unloaded so far that a perfect function of the device is no
longer ensured, also the storage batterys could take da-
mage!)
• A long-term switching of the equipment off with attached
storage batterys can lead to a low discharge.
• The terminal „Unswitched Out" ist monitoring from the
low discharge protection. At this connection the Vares
ESC-006A must be attached.
All manuals and user guides at all-guides.com
STöRMElDEkONTAkT
Belegung der 5-poligen Din-Buchse
change-over contact /
Wechselkontakt

WICHTIgE HINWEISE

Erstes Einsetzen der Akkus:
• Akkus nach Einbau oder Anschluss und vor Inbetriebnah-
• Fremdverbraucher, die am ungeschalteten 24-Volt Aus-
• Ein langfristiges Abschalten des Geräts mit angeschlos-
• Die Anschlussklemme „Unswitched Out" wird vom Tiefen-
FEHlERMElDUNg
Normalbetrieb: Kontakt zwischen Pin 2 und 1
Störung:
Akkus bitte erst unmittelbar vor Inbetriebnahme des Ge-
rätes ESP-700A einbauen oder an das Gerät anschließen.
me der Anlage mit ESP-700A vollständig aufladen.
gang (unswitched out) des Gerätes betrieben werden, bitte
ebenfalls erst unmittelbar vor Inbetriebnahme anschließen.
(Akkus können sonst soweit entladen werden, dass eine
einwandfreie Funktion des Gerätes nicht mehr gewährlei-
stet ist, und die Akkus Schaden nehmen könnten!)
senem Akku kann zu einer Tiefenentladung führen.
entladeschutz mit überwacht. An diesem Anschluss muss
die Vares ESC-006A angeschlossen werden.
Kontakt zwischen Pin 2 und 3
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis