Specifications; Operation - VOLTCRAFT VC-PB-PD 1500 Bedienungsanleitung

Operating Instructions
Power Bank LiPo 15000 mAh
Item No. 2346662
Intended use
This product is a 15000 mAh power bank with Lightning
detection for quick and efficient charging. With a total max. output of 3.4 A, the power bank can
charge two devices simultaneously and features battery indicator LEDs to indicate how much
charge is left.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g.
in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Power bank
• USB-A to Type-C cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- Is visibly damaged,
- Is no longer working properly,
- Has been stored for extended periods in poor ambient conditions, or
- Has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Caution:
• To avoid damaging the components, do not attempt to open or repair the product
without professional guidance.
• Proper use helps to prolong the lifespan of the product.
and Type-C ports and smart device
®
b) Using the power bank
• Only charge the device using a computer or a certified and approved power
adapter.
• Do not store the device in high or low-temperature environments, small and
enclosed areas without ventilation or within proximity to fire.
• Stop using the device immediately if it becomes excessively hot, emits an odour
or is dented or abnormally deformed.
• Dispose of the battery only in an authorised recycling centre.
c) Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product. Check device voltage compatibility before use.

Specifications

Battery
Type-C port input
Type-C cable input
Lightning cable output
®
Type-C cable output
Operating elements
5
3 2 1
1 Power ON/OFF
2 Type-C Input
3 Battery Indicator

Operation

charge
0%~25% 25%~50%
LED 1 flashing LED 1 on
LED 2 flashing
0%~5% 5%~25%
LED 1 flashing LED 1 on
• To charge the power bank, connect the charger to the Type-C input port. The battery
indicator LED displays the current charge in increments; the power bank is fully charged
when all 4 LEDs are on.
• To charge a device, use an appropriate cable to connect the device to the power bank and
press the Power ON/OFF key. If no output cable is connected within 60 seconds, the power
bank will automatically turn off.
• Unplug the charging cable when charging is complete.
• When a Type-C output cable is connected to the power bank and the power bank is turned
off, charging will start automatically.
• If the power bank overheats, the temperature protection function will automatically stop
charging/discharging and all battery indicator LEDs will flash. Charging/discharging will
resume when the temperature of the power bank is 10 °C lower than the temperature
protection limit.
3.7 V, 15000 mAh, 55.5 Wh Li-Polymer
5 V/2 A, 9 V/2 A
5 V/2.4 A, 9 V/2 A
5 V/3 A, 9 V/2.2 A
5 V/3 A, 9 V/2.2 A, 12 V/1.5 A
4
4 Type-C Cable
5 Lightning Cable
®
50%~75% 75%~99%
LED 1 -2 on LED 1 -3 on LED 1 -4 on
LED 3 flashing LED 4 flashing
25%~50% 50%~75% 75%~100%
LED 1 - 2 on LED 1 -3 on LED 1 -4 on
100%