Grundig 42 VLE 8500 B0 Serviceanleitung Seite 19

NETWORK SETUP
-------------------------------------------------------------------------------------------------------------
10 To continue after pressing the WPS button on the access
point, press » « (green).
– The "Connection to Gateway: Success" message will
be displayed.
11
Press » « (green) to make sure that the network
connection is established with the current settings.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection To
Gateway: Success«, »Internet Connection: Success«
messages will be displayed.
12 Press »EXIT« to end the setting.
Wireless WPS network connection with PIN
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with »OK«.
>
3 Select the menu item »Network Configuration« with » «
<
or » « and press »OK« to confirm.
– »Network configuration« menu is displayed.
4
Select the line »Change Connection Type« with » V « or
» « and press »OK« to confirm.
Λ
5 < >
Select the option »Wireless WPS« with » « or » « and
press »OK« to confirm.
– WiFi warning screen will be displayed.
6 Activate WiFi with » « (green).
7 Select the line »WPS Type« with » V « or » Λ « and select
< >
the option »PIN« with » « or » «.
Timer Applications Network Configuration Settings
Ch ge Connection T p Wireless WPS
WiFi On
WPS Type PIN
Select Ac ess Point N/A
Network Configuration AUTO
Ad an
Ch e Area Back Ex
8 Select the line »Select Access Point« with » V « or » Λ «
and press »OK« to confirm.
– Present WPS-supported wireless networks are scanned
to display in the »Select Access Point« menu.
9
Select the network that you want to connect with » V «,
< >
» Λ «, » « or » « and press »OK« to confirm.
– 8-digit pin code is displayed in the wireless WPS
menu.
Note:
Refer to the manual of your router to find out how the PIN
7
is entered via a PC.
10 Use a PC to enter the pin on the router (e.g. AVM
FRITZ!Box: menu item WLAN Settings... WPS) and save.
Note:
The 8-digit PIN code must be entered in the modem
7
interface in 2 minutes; otherwise, connection of Internet
TV with the modem is cut.
11 Press » « (green) to confirm the registration.
– The message "Connection to Gateway: Success"
appears.
12 ENGLISH
12
Press » « (green) to check the performed settings and
also if the local network and internet connection has
been established.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection
To Gateway: Successfull«, »Internet Connection:
Successfull« messages and MAC address will be
displayed.
13 Press »EXIT« to end the setting.
Connecting automatically by entering the
network password
Use this method for establishing a connection if your router
does not support "WPS-PBC" or WPS PIN entry.
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with »OK«.
>
3 Select the menu item »Network Configuration« with » «
<
or » « and press »OK« to confirm.
– »Network configuration« menu is displayed.
Timer Applications Network Configuration Settings
Ch nge Connection T p Wired
OK
Network Configuration AUTO
Ad an
Con ect Test Con ection Ch e Area Back Ex
4
Select the line »Change Connection Type« with » V « or
» « and press »OK« to confirm.
Λ
< >
5 Select the option »Wireless« with » « or » « and press
»OK« to confirm.
– WiFi warning screen will be displayed.
6 Activate WiFi with » « (green).
7 Select the line »Network Configuration« with » V « or
< >
» « and select the option »AUTO« with » « or » «.
Λ
8 Select the line »Select Access Point« with » V « or » Λ «
and press »OK« to confirm.
– »Select Access Point« menu is displayed by scanning
available wireless networks.
9
Select the network that you want to connect with » V «,
< >
» Λ «, » « or » « and press »OK« to confirm.
– Wireless connection password screen is displayed.
Note:
For device to discover the wireless modem on the network,
7
the network name should support ASCII characters.
10 <
Select the required character with » V «, » Λ «, » « or
>
» « and move to the next character with »OK«.
– Using »Shift« »OK«, you can switch between
uppercase letters / numbers and lowercase letters /
special characters.
– Select » « to delete the character entered and press
»OK« to confirm.
NETWORK SETUP
-------------------------------------------------------------------------------------------------------------
11
Confirm the password with » « (green).
– »Connecting ... Please wait« message will be
displayed, and if the connection is established
»Connection To Gateway: Success« messages will be
displayed.
12 Press » « (green) to check the performed settings and
also if the local network and internet connection has
been established.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection To
Gateway: Success«, »Internet Connection: Success«
messages will be displayed.
13 Press »EXIT« to end the setting.
Note:
If you do not have a dynamic network, follow the
7
instructions in manual connection section (see "Detailed
Manual").
ENGLISH 13