Remote Control - Onix CD 10 Bedienungsanleitung

AC IN
USE ONLY WITH A 250V FUSE
WARNING
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
~ 2 2 0 V 5 0 H z /
FUSE 100V - 120V: T1AL
220V - 240V: T500mAL
1. Power input socket with fuse
2. Digital coaxial output (RCA S/PDIF)

Remote Control

Direct selection digits
Fast rewind/fast forward keys
Brightness adjustment key
Note: Keys not described are not
intended for the machine.
It is normal if there is no response pushing
Listening
1. Connect CD player to the amplifier with appropriate cables .
2. Press ( ) to open the disc loading area, insert an audio-cd, press ( ) to close the loading disc area then press (
to start the CD.
3. Once the loader is started, screen shall display total tracks and time.
4. Adjust the volume of the amplifier by using the VOLUME of the control.
MODEL: CD10
CLASS 1 LASER PRODUCT
POWER CONSUMPTION: <50W
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER CLASE 1
COMPACT DISC PLAYER
SERIAL NO.:
ONIX ELECTRONICS LTD.
Load/eject
Stop key
Play/pause key
Previous/next keys
Mute key
them..
DIGITAL OUT
COAXIAL
ENGLAND
3. Right channel analog output
4. Left channel analog output
OPEN/
CD/SACD CLOSE INPUT
1 2 3
4 5 6
7 8 9
0
SCAN REPEAT
PROG
RANDOM
DIMMER MUTE VOLUME
R C - 1
ANALOG OUT
R L
Replay key
Random play key
To operate the remote
control requires two battery of
AAA 1.5 V, which are not included.
)
4