Adam Hall GRAVITY MA 3D A POP 1 Bedienungsanleitung

TRAVELER 3D ARM
WITH POP FILTER · MA 3D A POP 1
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Gravity is a registered brand of the Adam Hall Group
®
FEATURES
• Pop filter with double nylon mesh
• Large screen diameter of 157 mm
• Tilt and rotation of joints can be adjusted
• Flexible clamping range from 15 mm to 35 mm
• Easy to handle
DESCRIPTION
The Traveler Series' Pop Filter with 3D Arm
Every bit of weight counts when you're travelling by plane or truck from
one gig to the next. After all, you can't always rely on the concert venue
having the right tool available for you when needed.
The Pop Filter with 3D Arm MA 3D A can be taken everywhere you go. It's so
light and space-saving, there's absolutely no need for you to worry about
weight or storage space.
With this tool you can enhance your voice- and vocal recordings by placing
the high-quality pop filter, with double nylon mesh and a large screen
diameter of 15.7 cm between you and your microphone. This way you
avoid unwanted pop noises and clipping.
Its fastening mechanism is quick and easy to assemble. The large clamping
range from 15 to 35 mm lets you mount it on all popular microphone stands,
and the three joints' 360° rotation options allow you to install it as you like.
Simply loosen, adjust and tighten the wing-screws. Voila - you're all done!
Once set, the MA 3D A POP 1 stays locked in place.
Gravity has once again delivered a small, useful and reliable product for
®
you to round off your collection of stands.
SPECIFICATIONS
Product number
Product type
Type
Material
Color
Joint adjustment
Joint rotation
Joint tilt
Arm lenght
Suitable for mounting on
Thread size
Screen diameter
Setup
Fits tube diameters up to
Weight
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
GMA3DAPOP1
Microphone Accessories
Pop filter
Plastic, Polyamide
Black
Wing screw
360˚
180˚
400 mm
Microphone Stands
3/8"
157 mm
Double nylon screen, plastic frame
15 mm - 35 mm
0.377 kg
Phone: +49 60 81 · 94 19-0
adamhall.com