Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DO NOT leave your child unattended in the child restraint.
Dry metal parts after any contact with water to prevent the formation of rust.
DO NOT use this child restraint on a passenger seat fitted with a frontal airbag under any
circumstance.
Make sure the product is bought from a decent sales channel. The manufacturer
doesn' t guarantee the quality of second hand products.
The illustrations in this manual are for reference only, and
may differ slightly from your seat model.
Please always keep this instruction manual for future reference.
2. Preparatory Work
2.1 Prepare ISOFIX
1)
If your car is not equipped with the ISOFIX guide socket,
please insert the guide socket into the ISOFIX anchor.
TIP: ISOFIX anchors are located between the surface and the
backrest of the vehicle seat.
2)
Pull the ISOFIX puller (19) until both ISOFIX connectors (18)
coming out completely.
03
3)
Grasp the child seat with both hands into the insert guides
until both ISOFIX connectors (18) engage with a "click" sound
on both sides. The green safety buttons must now be visible
on both sides.
04
CAUTION! The ISOFIX connectors (18) are secured
ONLY when both indicators are completely green.
2.2 Adjust harness and headrest with 5-point harness
(Group I)
A correctly adjusted Headrest (01) ensures optimal protection for
your child in the child car seat:
The Headrest (01) must be adjusted so that the shoulder belts are
at the same level as your child' s shoulders.
GB 06
02
02
03
04
CLICK
05
05
06
CAUTION! The shoulder belts must not run behind
the back of the child or at ear height or above the
ears.
1)
Press the Adjustment button (08) and pull the shoulder
belts towards you with another hand.
07
2)
Slide the GI height adjuster handle (15) to select the
correct height of the shoulder belts and engage it in the
position that fits for your child.
2.3 Adjust headrest with 3-point vehicle belt (Group II/III)
1)
Squeeze the GII/III height adjuster handle (12) at the back
08
of the Headrest (01). This unlocks the Headrest (01).
2)
Slide the Headrest (01) to the desired height. As soon as
you release the GII/III height adjuster handle (12), the
Headrest (01) will lock into place automatically.
09
3)
Place the child seat on the vehicle seat.
4)
Have your child sit down in the child seat and check the
height. Repeat this process until the Headrest (01) is at
the optimal height.
2.4 Adjust recline position (Group I/II/III)
10
Find the Recline handle (11) which is under the seat shell. Pull it to
adjust the backrest angle position.
10
06
07
08
09
GB 02
GB 07
Werbung
Kapitel
Inhaltsverzeichnis
