Herunterladen Diese Seite drucken

Werbung

110
(4 21/64")
11
(7/16")
52
(2 3/64")
Ø35
(Ø1 3/8")
L. 600 mm
(1' - 11 5/8")
130,5
(5 9/64")
51
(2 1/64")
G 3/8"
BAR30
_ REV11
DESIGN
NATALINO MALASORTI
BAR30/BAR
AISI 316/L STAINLESS STEEL
Miscelatore idroprogressivo
monoforo con bocca erogazione
Deck mounted hydroprogressive
mixer with spout
Portata aeratore 5,7 l/min / 1.5 gpm, risparmio idrico
Flow rate aerator 5,7 l/min / 1.5 gpm, water saving
MANUTENZIONE / MAINTENANCE
acido clorico e muriatico
HCl
cloric and muriatic acid
acido fluoridrico
NON UTILIZZARE
HFl
DO NOT USE
hydrofluoric acid
ipoclorito di sodio
NaClO
chlorine bleach
sapone a PH neutro
UTILIZZARE
PH
TO USE
7
neutral PH soap
Questi disegni sono proprietà di CEADESIGN SRL s.u. pertanto non potranno
essere utilizzati e/o comunicati a terzi, anche in forma parziale, senza preventiva
autorizzazione. CEADESIGN SRL s.u. si riserva il diritto di apportare modifiche ai
disegni al fine di migliorare il prodotto.
CEADESIGN SRL s.u. has the property rights on these drawings, therefore they
cannot be used and/or transferred to third party, even in partial form, without any
prior authorization. Furthermore CEADESIGN SRL s.u. reserves the right to apply
any change to these drawings in order to upgrade the product.
ceadesign.it

Werbung

loading

Inhaltszusammenfassung für CEA BAR30

  • Seite 1 BAR30 (4 21/64”) (2 1/64”) _ REV11 DESIGN (7/16”) NATALINO MALASORTI BAR30/BAR AISI 316/L STAINLESS STEEL Miscelatore idroprogressivo monoforo con bocca erogazione Deck mounted hydroprogressive mixer with spout (2 3/64”) Ø35 (Ø1 3/8”) Portata aeratore 5,7 l/min / 1.5 gpm, risparmio idrico Flow rate aerator 5,7 l/min / 1.5 gpm, water saving...
  • Seite 2 BAR30 _ REV11 H (mm) AVVERTENZE D’ISTALLAZIONE L’altezza ottimale d’istallazione del prodotto si determina in base all’altezza dell’utente e del lavabo. INSTALLATION WARNINGS Each individual product has to be installed and adjusted to suit the user’s and the washbasin height.
  • Seite 3 BAR30 _ REV11 AVVERTENZE TECNICHE Risciacquare bene le tubazioni prima del montaggio ed evitare sbalzi di pressione fra i raccordi d’acqua fredda e d’acqua calda. In caso di pressioni statiche superiori a 5 bar si raccomanda l’installazione di un riduttore di pressione per evitare danni alla cartuccia.
  • Seite 4 BAR30 _ REV11 RICS016 RICM077 RICAMBI / SPARE PARTS KD/Z/P/X - S/L* RICA059 Aeratore / Aerator 5,7 l/min / 1.5 gpm RICA004 Inserto bocca di erogazione / Spout insert Cartuccia / Cartridge RICC003 RICF005 Flessibile / Hose RICM077 Maniglia / Handle...