Upholstery Nozzle; Vacuum Cleaning - Hoyer BBK 700 A1 Bedienungsanleitung

Upholstery nozzle
Crevice/brush nozzle
• Fold the brush out in the direction of the
arrow to turn the crevice nozzle 2 into a
brush nozzle.
This is suitable e.g. for uneven objects,
lamps, profile strips.
3
The upholstery nozzle 3
is suitable for uphol-
stered furniture, mat-
tresses and car seats,
etc.
2
The crevice nozzle 2 is
suitable for skirting
boards, corners, col-
umns and upholstery
etc.

8. Vacuum cleaning

WARNING! Risk of material dam-
age!
All of the filters and a dust bag must al-
ways be assembled when vacuuming.
Switching the vacuum cleaner on
and off
1. Assemble the accessories needed.
2. Pull out the power cable 21 at least to
the yellow mark. Stop at the red mark.
The power cable must not be pulled out
by force until it stops.
3. Plug the mains plug 21 into a suitable
wall socket. The wall socket must still be
easily accessible after connection.
4. Press the on/off switch
the device on.
Auxiliary air valve
• When vacuuming light, delicate ob-
jects (such as curtains) you can regulate
the suction power flexibly when neces-
sary. The further the auxiliary air
valve 15 is opened, the weaker the suc-
tion power becomes.
15
• During normal vacuuming, the auxiliary
air valve 15 should remain completely
closed, so that the suction power is not
reduced.
• Fully open the auxiliary air valve 15 to
quickly release textiles which have been
sucked in.
17, to switch
27
GB