Habitat Rita Bedienungsanleitung Seite 2

EN
This manual contains important information that should be kept for future reference.
For domestic use only.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the plastic bags out their reach. The small parts pose a choking
hazard.
Materials
Top: varnished oak veneered particle boards.
Structure: varnished solid oak (frame), varnished oak veneered particle boards and painted particle board of medium density
fiberboard (MDF).
Doors: veneered oak veneered particleboard (front) and painted medium density fiberboard (MDF) veneered (rear).
Back panels: varnished oak veneered particle boards (left part) and painted medium density fiberboard (MDF) veneered panels
(right part).
Shelf: painted medium density fiberboard (MDF).
Feet: solid varnished oak.
Assembly Instructions
Before beginning assembly, identify all components using the manual.
In order not to lose components, do not throw the package before completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where it will be installed.
Assemble on a clean, flat surface.
Warning! Fix the product to the wall to ensure its stability. Use the type of screws and wall plugs for the supporting material.
Before drilling, make sure that no pipes or cables will be present in the drilling area.
Over time, the fasteners may lose their effectiveness. Periodically check for loose screws. Retighten if necessary.
Recommendations for use
This product has been designed for indoor use only.
Do not sit on the product.
Do not stand on the product.
Do not overload the shelf.
Products based on wood, particle board, painted, varnished and / or lacquered can give off an odor when opened. This odor
disappears after a few weeks if the room is properly ventilated.
Maintenance
In order not to damage the surface, it is recommended that you do not place hot or humid object directly on the surface.
Do not use magazines or newspapers as trivets. The ink used may leave traces that can permanently stain the furniture surface.
To avoid the appearance of marks, do not leave any stationary object for more than 2 months.
Avoid placing furniture in the immediate vicinity of a heater or air conditioner. The heat and humidity can cause cracks or
deformities.
Any spills should be removed immediately with a cloth. Then wipe the surface with a clean, dry cloth.
The use of furniture polishes is not necessary or recommended.
Clean plating using a soft, damp cloth. Then wipe with a dry cloth.
For a longer life of the furniture, it is recommended to maintain it with a special oil furnishing once a year.
Do not use abrasive cleaners.
Clean with movements within the meaning of the wood.
Keep the label with lot number, it may be useful in case of complaint.
If you have any comments or suggestions regarding this product, assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat.eu or write to this address: HABITAT FRANCE – 70 AVENUE VICTOR
HUGO 93300 AUBERVILLIERS – FRANCE.
Rita – 06/2020 1